Kramer PT-572+ HDMI over Twisted Pair Receiver
The Kramer PT−572+ is a DGKat™ twisted pair receiver for HDMI signals. The Kramer PT−571 converts an HDMI signal to a single twisted pair signal and the Kramer PT−572+ converts the twisted pair signal back to an HDMI signal.
Kramer PT-572+ HDMI over Twisted Pair Receiver
- Max. Data Rate - 1.65Gbps.
- HDTV Compatible.
- HDCP Compliant.
- DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
- HDMI Support - HDMI (V.1.4 with 3D, Deep Color, x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD).
- 3D Pass-Through.
- System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC−DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC−DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC−DGKat7a23 cable.
- Cable - Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524 & BC-DGKat623 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
- EDID PassThru - Passes EDID signals between the source and display.
- Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached.
- Power Connect™ System - A single connection to the transmitter or the receiver powers the system when the devices are within 270ft (90m) of each other.
- Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side−by−side in a 1U rack space with the optional RK−4PT rack adapter.
Spezification Kramer PT-572+ HDMI over Twisted Pair Receiver
- INPUTS: 1 RJ−45 connector.
- OUTPUTS: 1 HDMI connector.
- BANDWIDTH: Supports up to 1.65Gbps bandwidth per graphic channel.
- COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
- POWER SOURCE: 12V DC, 250mA.
- DIMENSIONS: 6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H.
- WEIGHT: 0.14kg (0.3lbs).
- ACCESSORIES: Power supply.
- OPTIONS: RK−4PT 19” rack adapter.
| Product sheet: |  [pdf, 50 kb] |
|---|---|
| Technical drawing: | [pdf] |
| Others: | [pdf - Englisch] |
| Installation manual: | [pdf, 817 kb] |
| Contains installation material: | + |
| Warranty: | 7 years |
| Manufacturer/Importer: | Kramer Germany GmbH, Gladbacher Str. 17, 52525 Heinsberg, info_de@kramerav.com |
| color: | Others |
If warning and safety instructions are to be observed for a product, these can be found in the respective installation instructions or in a separate PDF, depending on the manufacturer. Available documents for the product can be found in the available PDF files (see above).
Download area - catalogs, flyers, warranty conditions, ...
1 review
8 January 2026 05:59
Schnelle Lieferung, top Produkt
Bin begeistert von der kurzen Lieferzeit und der Qualität.
Questions & Answers
-
What is the Kramer PT-572+ Twisted Pair Receiver for HDMI?
The PT-572+ is a Kramer Twisted Pair HDMI receiver. DGKat signaling integration — Kramer’s unique technology to convert TMDS as well as control and communication signals into signals for Twisted Pair transmissions.
-
What HDMI features are supported?
HDMI support — HDMI (V1.4 with 3D, Deep Color, x.v.Color, Lip-Sync, uncompressed audio channels, Dolby TrueHD and DTS-HD). 3D passthrough is supported.
-
What is the system range with different cables?
System range up to 90 m at 1080i or 30 m at 1080p with BC-DGKat524 cables; up to 90 m at 1080i or 70 m at 1080p with BC-DGKat623 cables; up to 100 m at 1080i or 90 m at 1080p with BC-DGKat723 cables.
-
Which cables should be used?
For optimal range and performance use BC-DGKat524, BC-DGKat623, BC-DGKat723 cables. Range depends on resolution, graphics card and display.
-
What does EDID passthrough mean?
EDID passthrough enables the EDID communication between source and display.
-
What do the status LEDs indicate?
Red = power present, Orange = power and output connected, Yellow = input and output active.
-
What is the Power Connect System?
In a system, only one device needs powering if the devices are less than 90 m apart.
-
What is the Pico TOOL and RK-4PT rack adapter?
Ultra-compact Pico TOOL — four devices can be mounted side-by-side in 1U in a 19-inch rack using the RK-4PT rack adapter.
